Click to place impedance. Drag the end point to match. Add and remove components visually.
Impedance Readout
Z50 + j0 Ω
Y20 + j0 mS
|Γ|0.000
∠Γ0.0°
VSWR1.000
RL∞ dB
Load Impedance
Add Component
Components (click to select, × to remove)
No components. Add one above.
Tips: Click the chart to set load. Add components to move toward center (matched). Click a component in the list to highlight its arc. Click × to remove any component. Drag the red point to adjust the last component's value.